Catalogue

Sit your CSCS test at a date and time convenient to you, at our easily accessible test centre in Leicestershire. With free on-site parking, we will provide you with a comfortable, out of town environment to sit your test hassle-free. Without this card you cannot undertake work on most construction sites. Your card acts as proof of identity and demonstrates your competence in performing the job in a safe manner. Based on your job role and qualification you may apply for different tests and cards.

In response to the challenges faced from the Covid-19 pandemic, we now offer e-Learning as an alternative way of delivering high quality CITB training.

Now available LIVE via the OMS 'Virtual Classroom Training System'

Now available LIVE via the OMS ‘Virtual Classroom Training System’

This immensely popular course is now required when applying for a Construction Skills Certification Scheme (CSCS) Green Card/Labourer Card. It is designed for all those who have entered or are looking to enter the construction and civil engineering.

This combined Site Safety Plus package is a popular route for anyone looking to take their first step towards obtaining a CSCS Labourers (Green) Card. This 1 day course can be for those who have entered, or about to enter, the construction and civil engineering industry. The course gives delegates an awareness of health and safety and how it affects their daily role and provides the CITB Health, Safety and Environment (HS&E) Test, which delegates must also pass to acquire the CSCS Labourers (Green) card.

The Achieving Behavioural Change (ABC) provides training on the benefits of adopting behavioural change for all contractors who work on construction and civil engineering projects. It is designed to provide delegates with an understanding of how attitude, behaviour, communication and worker engagement at all levels can help prevent the chances of accidents occurring.

The CITB Site Environmental Awareness Training Scheme (SEATS) is a one-day classroom course designed to provide delegates with a clear introduction to environmental issues on construction sites. CITB funding available for this course - per person, per day – for ALL registered companies.

Health and Safety is of paramount importance on site, and ensuring that your employees are protected from harm is one of the primary duties for those in an on-site management position. The Site Management Safety Training Scheme (SMSTS) Site Safety Plus course is designed to cover all aspects of health and safety on site. The course is recognised by The United Kingdom Contractors Group (UKCG) as meeting the requirement for all managers working on UKCG sites. CITB funding is available for this course - per person, per day – for ALL registered companies.

This course is designed for learners who have completed the CITB Site Management Safety Training Scheme (SMSTS) course and are looking to update and renew their knowledge. It includes a review of the material covered in the original course, as well as providing an update on legislative changes and an introduction to new subjects. CITB funding is available for this course - per person, per day – for ALL registered companies.

This course introduces the required knowledge of health, safety, welfare and environmental issues that everyone in a supervisory position needs. It illustrates the legal responsibilities relevant to their work activities and focuses on the requirement to promote health and safety effectively. CITB funding is available for this course - per person, per day – for ALL registered companies.

This course is designed for current holders of the Site Supervision Safety Training Scheme who are looking to refresh their knowledge and skills, particularly those who wish to renew their SSSTS certification. CITB funding is available for this course - per person, per day – for ALL registered companies.

This two day course is designed to assist those on site who have responsibility for managing all forms of temporary works. It is also designed to give confidence to senior management and those who engage with contractors, to reach an assessed standard of knowledge. CITB funding is available for this course - per person, per day – for ALL registered companies.

This one-day course is designed to offer a thorough knowledge of the temporary works supervisor role, as well as providing an insight into the risk management of temporary works. This course is solely concerned with the process of the supervision of temporary works and is not a temporary works awareness course. CITB funding is available for this course - per person, per day – for ALL registered companies.

Now available LIVE via the OMS ‘Virtual Classroom Training System’

Now available LIVE via the OMS 'Virtual Classroom Training System'

Now delivered LIVE using the OMS ‘Virtual Classroom Training System’

Now delivered LIVE using the OMS ‘Virtual Classroom Training System’

This qualification is designed for tradespeople, or qualified electricians, who work in the electrical industry and are involved in meeting the requirements for electrical installations, to BS7671. Essentially, you will want to make sure if you are working in electrical installation that you are designing and installing to the latest regulations. In fact, every installation from January 2019 will need to be designed in line with the 18th Edition wiring regulations.

This is an update course for all candidates with the City and Guilds 2382-15 (3rd Amendment, Yellow Version of The 17th Edition course) wanting to gain the 18th Edition course 2382-18. All Candidates wishing to complete this course will need to provide proof of Certification, via scan/photocopy of your City and Guilds certificate prior to Booking Confirmation. This update course will run as a 1 day update and the course will be constructed on the 18th Edition updates only.

Essentially you will want to make sure if you are working in electrical installation that you are designing and installing to the latest regulations. In fact every installation from January 2019 will need to be designed in line with the 18th Edition wiring regulations.

PTLLS is the acronym for the Award in Preparing to Teach in the Lifelong Learning Sector. This qualification consists of four units. Each unit has a 3 credit value (within the QCF framework) which adds up to the 12 credits required to achieve this award. This is a mandatory qualification for those wishing to enter teaching in the regulated Lifelong Learning Sector (LLS) in England and forms part of the framework of qualification for teachers in the LLS. It allows teachers to progress on to the ‘Certificate in Teaching in the Lifelong Learning Sector’ (CTLLS) and the ‘Diploma in Teaching in the Lifelong Learning Sector’ (DTLLS). If taken as a stand-alone qualification, it can receive accreditation of prior learning (APL) within 6302 CTLLS, 7305 DTLLS, and the level 5 subject specialist diplomas for literacy, ESOL and numeracy.

DTLLS is the acronym for the Diploma in Teaching in the Lifelong learning Sector. It may be offered to pre-service and in-service candidates on a part-time or full-time basis and is awarded at level 5 upon completion. The diploma meets the qualification requirements for the full teaching role. It comprises level 4 (part one) and level 5 (part two) mandatory units and optional units. The total minimum credit value required of this qualification is 120 credits on the QCF. You may carry forward credits and receive accreditation of prior learning (APL) for the PTLLS unit or 7303 Award and the Planning and Enabling Learning unit within 7304 CTLLS if previously achieved. Optional unit credits completed as part of the CTLLS may not count towards the level 5 diploma qualifications

Designed to help learners develop their skills and learn more about aspects of health and safety in the work environment, this primarily work-based course helps them identify, monitor and control their workplace hazards effectively.

This improved Level 6 Diploma in Occupational Health and Safety is ideal for learners who wish to demonstrate and develop their skills and knowledge in managing health and safety for the workplace. It allows learners to develop and demonstrate the skills required for employment and/or career progression in the occupational health and safety sector. The Level 6 NVQ Diploma in Occupational Health and Safety Practice can be used as entrance to IOSH Graduate Membership.

Modern process-based auditing is about ensuring that systems are effective and address customer needs. An ineffective audit can have severe consequences, resulting in process failure, customer satisfaction and regulatory non-compliance. With this highly interactive two-day course, based around a very realistic case study, we will illustrate the necessary skills to assess and report on the conformance and implementation processes based on ISO 45001:2018.

This course is designed to outline the skills and knowledge required to implement a successful audit based on ISO 45001:2018. Delegates will learn how to initiate an audit, prepare and conduct audit activities, compile and distribute audit reports and complete any follow-up activities.

Now available LIVE via the OMS ‘Virtual Classroom Training System’

ISO 9001 is arguably the most successful ISO standard ever – with over 1.2 million certifications around the world. The 2015 version, which is the fifth edition of ISO 9001, is an evolution not a revolution. It is also much more flexible on prescribing mandatory requirements whilst being more focused on real and effective business management systems that are actively driven by top management.

These 2 courses run over 3 days, aims to provide students who have an existing basic knowledge of, or experience in quality management, with an understanding of the management system’s approach and the requirements of ISO 9001, 1 day foundation course which then leads into the highly interactive Internal Auditor 2 day course, designed for those people who require a sound understanding of the techniques and principles of quality auditing.

Modern process-based auditing is about ensuring that systems are effective and address customer needs. An ineffective audit can have severe consequences, resulting in process failure, customer satisfaction and regulatory non-compliance. With this highly interactive two-day course, based around a very realistic case study, we will illustrate the necessary skills to assess and report on the conformance and implementation processes based on ISO 9001:2015, providing the knowledge and skills required to audit with confidence.

Transform existing auditor skills to conform with ISO 9001:2015, the latest implementation of what is arguably the most successful ISO standard ever. This course is designed to train learners in how to effectively audit a quality management system in accordance with ISO 9001, and to give them best practice skills and up-to-date knowledge so that they can help your business constantly improve.

This course aims to provide delegates who have an existing, basic knowledge of, or experience in, health and safety management with an understanding of the management systems approach and the requirements of ISO 45001, and to provide a basis for delegates who wish to go on to complete further OHSMS Auditor Training courses.

This course aims to provide delegates who have an existing, basic knowledge of, or experience in, environmental management with an understanding of the management systems approach and the requirements of ISO 14001, and to provide a basis for delegates who wish to go on to complete other EMS Auditor Training courses.

As the name suggests, this course focuses on the changes that are being made to our motorway network to reduce congestion, make road journeys safer, more reliable and more efficient. The course is a full day and is approved for both “C” and “D” category license holders.

The first part of this course looks at the driver including how personal lifestyle choices can impact on your ability to act in a professional manner. The course also looks at the driver’s role in positioning and securing items to a vehicle to comply with current best practice and industry guidelines. The second is designed to give delegates an awareness of the hazards associated with fires and the correct procedures to manage an event involving a fire, whilst thinking of their own safety and the safety

This course is aimed at LGV and PCV drivers, as well as other staff who wish to gain a good understanding of basic first aid.

This course is designed to look briefly at all aspects of the driver CPC Syllabus ensuring that drivers meet their legal obligations and having an understanding of their own working time regulations. Please be aware that covering all aspects of the syllabus is a legal requirement.

The first part of this course is aimed at those who need to give signals to drivers or receive signals to aid in the safe manoeuvring of vehicles. The second part of this course looks at injuries caused by manual handling and the significant number of accidents and lost time working in the workplace.

This course aims to empower both individuals in the work place and communities to understand the signs and symptoms of mental health issues and how best to support themselves and those around them in recovery.

The qualification will equip the first aider with skills to be able to confidently undertake emergency first aid if someone becomes ill or injured at work and consists of 6 hours of instructor led tuition with the emphasis on practical application of first aid skills

This specially designed programme has been adapted from the HSE Emergency First Aid at Work (EFAW) course to meet the needs of people who work within a school setting. The course follows the syllabus set by the Health & Safety Executive and is delivered in accordance with the Approved Code of Practice L74 for training of candidates in first aid for low risk environments.

Keep your first aid knowledge sharp even before your certificate expires with this short course designed to help you practice and update your skills.

First Aid can literally be a life saver when it comes to workplace accidents, and every workplace should have responsible first aiders on their team. On this course, we cover all the subjects first aiders need to know, and make sure they have the knowledge to step in when accidents or illness strikes. CITB funding is available for this course - per person, per day – for ALL registered companies.

This refresher course will need to be taken no later than the expiry date of your last course taken. If this date has passed then you no longer qualified to hold the qualification and a re-qualification course may not be open to you due to timescales. Please check with your previous accrediting body. Proof of prior certification is required for this course.

When a heart attack occurs, a defibrillator can save lives. In fact, prompt and proper use by a first responder is recognised by the Resuscitation Council (UK) as the best way to increase the chances of survival. In this half-day course, we cover the importance and proper use of defibrillators, as well as how to recognise the signs of angina or heart attack and deal with them appropriately. The course includes lots of hands-on practice for students, as well as guidance on maintenance, safety and troubleshooting.

Designed for those working in education and childcare, this two-day first aid course is tailored to first aid personnel who primarily work with children or infants. The course, which meets the requirements of the National Child Minding Association (NCMA), the Pre-School Learning Alliance (PLA) and OFSTED, covers a comprehensive range of topics around paediatric first aid care.

The NEBOSH National General Certificate new syllabus effectively represents the role of a real-life health and safety professional in 2020 and is the ideal choice for those who want to kick start a career as a health and safety professional. It combines extensive coverage of the main legal requirements for occupational safety in the UK with an outline of common workplace hazards and how to tackle them.

The new NEBOSH Health and Safety Management for Construction (UK) has been designed, following extensive research, to provide learners with the knowledge, skills and understanding required in the modern workplace. From 1st May 2021, this new qualification will deliver the knowledge and confidence that learners need to meet their health and safety responsibilities in the construction workplace, as well as enabling them to undertake safety inspections.

The new NEBOSH Certificate in Fire Safety has been designed, following extensive research, to provide learners with the knowledge, skills and understanding required in the modern workplace. From 1st May 2021, this new qualification will be recognised as the standard qualification in health and safety for the non-safety specialist with Fire Safety responsibilities. This is now a standalone qualification and does not require any shared units from the National General Certificate.

This course is designed to provide a sound foundation to the fundamental elements of environmental management. The course looks at environmental management systems and impact assessments, sources and use of energy and energy efficiency, control of pollution, planning for and dealing with environmental emergencies.

Our Level 3 Certificate in Occupational Health and Safety training course is ideal if your job involves health and safety and you have experience of developing and applying policy and procedures within your organisation. It will enable you to further develop your skills and cover aspects of health and safety within your work environment including the identification, monitoring and control of workplace hazards and risks.

This improved Level 6 Diploma in Occupational Health and Safety is ideal for learners who wish to demonstrate and develop their skills and knowledge in managing health and safety for the workplace. It allows learners to develop and demonstrate the skills required for employment and/or career progression in the occupational health and safety sector. The Level 6 NVQ Diploma in Occupational Health and Safety Practice can be used as entrance to IOSH Graduate Membership.

This course is designed for all those who require an in-depth knowledge of face fit testing. It looks at the legislation behind basic testing and the qualitative fitness test operator criteria as set out in HSE282/28. In addition, it also includes practical elements such as troubleshooting, mask maintenance and a number of practical exercises.

PUWER regulations apply to the safe use of any machinery or tools used in the workplace. These regulations require users of work equipment to carry out proper risk assessment, as well as obliging organisations to provide work equipment that is suitable for its intended task and that can be used without putting persons at risk. In this one-day course, we will provide delegates with the theoretical knowledge and practical ways they need to be able to interpret the requirements of PUWER and apply it to their own organisations.

Detecting cables and underground pipes requires a Cable Avoidance Tool and Signal Generator (or CAT and Genny), but improper use can cause disastrous, even life-threatening results. In this half-day course, we cover the legislation, safe working procedures and operating principles behind CAT and Genny use. The course goes over how to locate services, how to familiarise yourself with service drawings and how to maintain and service your equipment.

Companies are often unaware of their responsibility for the health and safety contractors commissioned to carry out work on their site within their jurisdiction. This can cause major problems in the event of an accident involving a contractor where the company has not ensured that the necessary health and safety risk assessments and procedures are in place. In this course, we review the legislation around hiring contractors and civil liability, in order to provide learners with a clear understanding of the requirements of their organisation.

Construction (Design and Management) regulations can often be misunderstood by new personnel, a problem which can lead to accidents, non-compliance or even prosecution. To combat the issue, the HSE have been targeting sites involving construction works, and it is more prudent than ever to make sure your knowledge of regulations is accurate and up-to-date. In this one-day course, we cover the latest legal issues,including liabilities and obligations, roles and responsibilities of duty holders, selection of competent staff and understanding the relevant documentation.

Working in confined spaces is a dangerous business. Apart from the danger of being trapped, there are risks of suffocation, drowning, fire, overheating, poisonous fumes, and free-flowing liquids and solids. In this half-day course, we look at the nature of these dangers, how to properly risk assess work in such a confined spaces, ways to avoid the need for entry, and emergency procedures.

Your organisation is responsible for assessing the health risks of hazardous substances to your workforce, and with this course, you will learn all you need to know about identifying those substances, understanding workplace exposure levels and creating a COSHH assessment properly. For anyone involved in the management or purchase of hazardous materials, this one-day course is an essential tool for raising awareness of this important issue.

This course is designed to increase awareness of noise risks and demonstrate the effects of noise on hearing and improve use of hearing protection. The content of the course complies with the training elements of the Control of Noise at Work Regulations 2005.

It is a requirement under Regulation 2, of the Health and Safety [Display Screen Equipment] Regulations that “Users” of display screen equipment have their workstations analysed to assess and reduce risks. This course ensures that delegates are fully informed of the legal and practical considerations of working with DSE.

In this one-day course, we consider the identification and control of risk from dangerous substances as required for compliance with the Dangerous Substances and Explosive Atmospheres Regulations 2002 (DSEAR). The course will not only look at the legal duties of globalisation, but also how to assess the risks from dangerous substances and how to control those risks.

Electricity regulations apply to all work premises, and to everyone who works in them. In this short course, primarily aimed at caretakers, care workers, office staff and others who use of electrical appliances as part of their normal daily routine, we look at the hazards and dangers of electricity as well as fundamental concepts and relevant legislation.

Knowledge of the world around us and how to protect it is essential for any employee within a business. In this course, we allow delegates to understand the basic concepts of environmental management and how it can add value to a business. The course is designed to give general awareness to staff at all levels within an organisation.

This simple half-day course is designed to provide participants with basic understanding and practical experience of use of portable fire fighting equipment, including practical training on syndicated fires. The course, which is workshop-based, can be run at your place of business.

This comprehensive half-day course, certified by the CPD, is designed for all those delegated the responsibility for evacuation procedures at business premises. We combine examination of current fire safety legislation and evacuation procedure with practical experience of fire extinguisher use. The course aims to provide participants with a greater awareness and understanding of fire and the dangers it poses, as well as teaching the essence of fast, safe and professional evacuation strategy.

High-pressure water jetting is commonly used during drain clearing and surface cleaning work, but when equipment is used improperly, it can pose great risk. In this one-day course, participants will gain the necessary skills and knowledge they need to safely operate high-pressure water jetting equipment, and become familiarised with the Water Jetting Association Code of Practice.

Accidents happen, but getting to the root cause helps identify risks and prevent them happening again. In this course, we review the accident investigation process to illustrate the benefits of accident prevention and useful techniques for accident investigation. It illustrates how to collect, analyse and communicate data, how to consider human factors and how to create strategies to ensure your organisation learns from safety failures.

Health and safety is a legal requirement for any business, and ignorance of the law is no defence against lapses that can cause accidents. This course has been designed for individuals who have been nominated as responsible for health and safety but lack any prior background or training in this area. The course is designed to cover all aspects of health and safety, from legislation to practical implementation. It is designed to allow delegates to complete the day’s training with confidence and understanding of health and safety at work issues.

Designed for directors and senior executives of an organisation, this short but highly focused briefing session is designed to educate and inform on the importance of strategic health and safety management, and the benefits of integrating health and safety and normal business practice. Delegates will be able to take away specific activities, in order to ensure they are visibly seen to be leading health and safety within their organisation.

Falls from heights are one of the biggest causes of workplace fatalities and major injuries. In this course, we look at legislation around working at heights, as well as examining the potential hazards and how to both assess and reduce their risk. This half-day course combines a classroom session and is ideal for organisational compliance with the Work at Height Regulations 2005 (WAHR).

Abrasive Wheels are used in a variety of different workplace scenarios, and when used improperly can be quite dangerous. According to The Provision and Use of Work Equipment (PUWER) 1998 act, all staff who use abrasive wheels must have proper training. This course provides an overview of legislation, as well as illustrating the potential hazards of abrasive wheels and how to avoid them.

Safe isolation of electrical equipment can be a critical part of ensuring worker safety, and in this half day course, aimed at those with basic little knowledge, we explore the tools and strategies needed to safely isolate electrical installations and equipment. The course will go on to study strategies of identifying safe point of isolation, locking off and proving dead.

One of the biggest causes of workplace accidents is back injuries, and these are often caused by poor lifting techniques. A lack of manual handling training can have a severe impact on the profitability of the organisation, especially when claims are raised by the injured party. In this course, we consider the practical considerations of manual handling work, looking both at the risk factors around manual handling, as well as basic manual handling techniques and loading limits. The course combines classroom and practical sessions.

Back injuries caused by poor lifting techniques remains one of the biggest causes of workplace accidents. This can disrupt work schedules, impact on profitability of an organisation, and leave it open to potential risks of litigation from injured parties. In this course, we will review the basics of good manual handling practice, as well as focusing on relevant legislation and the duties of managers and supervisors regarding manual handling.

This course is designed for persons who have to train and/or assess those who are involved in manual handling in the workplace. In-company trainers and supervisors who are responsible for the welfare of staff who undertake manual handling operations as part of their work would find this course particularly useful and beneficial.

This course gives attendees up to date knowledge of how to safely assess, monitor, manage, and control Scaffolding operations on site to ensure that cost effective and safe scaffolding works are undertaken by scaffolding contractors

This course aims to empower both individuals in and outside of their work place, it also provides a general awareness of mental health and the types of mental illnesses associated with it.

Asbestos Awareness Outline The Control of Asbestos at Work Regulations, lay down the requirements for the protection of people being exposed to asbestos. These regulations include the requirement for those with a responsibility for the maintenance and/or repair of non domestic premises, to identify and manage any risk from asbestos within their premises.

The aim of the courses is to provide delegates with the necessary knowledge to undertake qualitative face fit testing in line with INDG479 and HSG53. INDG479 is the HSE’s Guidance on respiratory protective equipment (RPE) fit testing and the guide provides information on fit test methods, information on what can be achieved from a fit test and the core information to be included in a fit test report. All training is based on this best practise approach.

This qualification is designed for people in their first management roles – including team leaders and first-line managers. Get the tools and confidence to coach or mentor people as part of your normal working role.

This qualification is designed for those who are practicing team leaders or new/aspiring team leaders. It helps people become more confident in leading the team and helps those making the transition into the role.

This qualification is ideal if you are have management responsibilities but no formal training, and are serious about developing your abilities. It’s particularly suited to practising team leaders seeking to move up to the next level of management, and managers who need to lead people through organisational change, budget cuts or other pressures.

This qualification is designed to consolidate your management skills and experience, build knowledge of specialist business areas such as finance and marketing , develop the capabilities and personal awareness you need to be a leader , accredit your experience with nationally recognised qualifications.

This qualification is designed for practising middle managers, to develop their skills and improve performance in readiness for senior management responsibilities.

This qualification is designed to prepare you for your first management role, or, if you are a practising first-line manager, equip you with tools and techniques to help improve your performance and get more from your teams.

This E-Learning option provides all of the benefits of the IOSH qualification, with the flexibility of sitting it at your convenience.

This E-Learning option provides all of the benefits of the IOSH qualification, with the flexibility of sitting it at your convenience.

This E-Learning option provides all of the benefits of the IOSH qualification, with the flexibility of sitting it at your convenience.

This E-Learning option provides all of the benefits of the IOSH qualification, with the flexibility of sitting it at your convenience.

Health and safety isn’t just a legal requirement, but an integral part of the success of any company. This course, designed in conjunction with business leaders, ensures you have the knowledge you need to lead health and safety policy in your organisation.

Now available LIVE via the OMS ‘Virtual Classroom Training System’

Now available LIVE via the OMS ‘Virtual Classroom Training System’

Health and safety isn’t just a legal requirement, but an integral part of the success of any company. This course, designed in conjunction with business leaders, ensures you have the knowledge you need to lead health and safety policy in your organisation.

Every manager should have an understanding of their responsibilities when it comes to health and safety. Managing Safely delivers the practical knowledge and tools needed to tackle health and safety issues in an engaging, innovative and effective format.

Created for learners who have already completed the IOSH Managing Safely course, this one-day refresher is designed to give participants an opportunity to renew their knowledge and gain the latest insights on health and safety legislation.

This short, one-day course is designed to give everyone at work an insight into the importance of working safely. It delivers a solid grounding in health and safety in an engaging, interactive and memorable way.

This course is designed for anyone who operates scissor lifts, telescopic and articulating booms, vertical platforms, vehicle mounted platforms and tele-handlers with integrated controls. The course outlines relevant health and safety regulations, as well as potential risks, the need for personal protective equipment (PPE) and concludes with a theory test.

The International Powered Access Federation (IPAF) Harness Course delivers a minimum of 4 hours instruction and provides delegates with the vital information and understanding on how to use full body safety harnesses and restraint lanyards when using a range of Working at Height Platforms

This course is designed for all those who are responsible for management or supervision of responsible for preparing and coordinating work with mobile elevating work platforms (MEWPs). The course outlines current legislation and details of different types and classifications of MEWPs, as well as the importance of correct machine selection and use of personal protective equipment (PPE). The course culminates in a theory test.

This course combines four hours of classroom and practical training and assessment on safe operation selection and use of Push-Along Vertical Personnel Lifts (PAV). The course is designed to provide attendees with certification for the use of PAVs, and will cover the legislation, safety issues and best practice around the use of these machines.

This course combines IPAF's new Harness Awareness and Harness User courses together, in a half day classroom course. Designed for candidates who need to use or wear a harness themselves, who are generally MEWP operators.

It is well-known that misuse of ladders are a common hazard for causing injury to workers. This course is designed to outline the legislation around the use of ladders and how to inspect, register and use ladders to protect, inspect and operate safely. In order to take this course, the Ladder Association’s Ladder User Course must have been completed and passed before attempting the Ladder Association’s Ladder Inspection Course you must hold a valid Ladder Association identity card.

Based on guidance from the UK’s leading experts on ladder manufacture, maintenance and safety, this course from the Ladder Association scheme addresses issues raised by the Health and Safety at Work Act 1974, as well as the Work at Height Regulations 2005. This course will ensure that delegates have knowledge and instructions required to use and select ladders and stepladders legally and safely.

Written with guidance from the UK's leading experts on ladder manufacture, maintenance and safety, the Ladder Association scheme addresses all the issues raised by the Health & Safety at Work Act 1974 and, more recently, the Work at Height Regulations 2005. This 2.5 hour training course will ensure delegates have the knowledge and instruction to be able to use and select ladders and step ladders legally and safely.

To gain an understanding of current relevant legislation, be able to thoroughly inspect ladders and stepladders identifying safety critical faults and record equipment details and inspections as outlined in PUWER.

The new NEBOSH Health and Safety Management for Construction (UK) has been designed, following extensive research, to provide learners with the knowledge, skills and understanding required in the modern workplace. From 1st May 2021, this new qualification will deliver the knowledge and confidence that learners need to meet their health and safety responsibilities in the construction workplace, as well as enabling them to undertake safety inspections.

The new NEBOSH Certificate in Fire Safety has been designed, following extensive research, to provide learners with the knowledge, skills and understanding required in the modern workplace. From 1st May 2021, this new qualification will be recognised as the standard qualification in health and safety for the non-safety specialist with Fire Safety responsibilities. This is now a standalone qualification and does not require any shared units from the National General Certificate.

The NEBOSH National Diploma new syllabus is a perfect choice for anyone who wants to make health and safety their career. Building upon the foundation of knowledge provided by the NEBOSH General Certificate, this highly respected qualification will help you build confidence in your capabilities and support your career progression.

The NEBOSH National Diploma new syllabus (2023) is a perfect choice for anyone who wants to make health and safety their career. Building upon the foundation of knowledge provided by the NEBOSH General Certificate, this highly respected qualification will help you build confidence in your capabilities and support your career progression.

Globally recognised and held by over 175,000 people in the UK and worldwide, the NEBOSH National General Certificate in Occupational Health and Safety is an ideal first step towards a career as a health and safety professional. In fact, 87% of UK employers request a NEBOSH qualification when recruiting for health and safety roles!

On completion of this qualification you will be equipped with the necessary skills to carry out an unaided incident investigation of a non complex incident. The qualification will take you through the four steps to a good incident investigation. This includes providing you with the skills required to identify the immediate, underlying and root causes of incidents.

Globally recognised and held by over 175,000 people in the UK and worldwide, the NEBOSH National General Certificate in Occupational Health and Safety is an ideal first step towards a career as a health and safety professional.

Globally recognised and held by over 175,000 people in the UK and worldwide, the NEBOSH National General Certificate in Occupational Health and Safety is an ideal first step towards a career as a health and safety professional. In fact, 87% of UK employers request a NEBOSH qualification when recruiting for health and safety roles!

Globally recognised and held by over 175,000 people in the UK and worldwide, the NEBOSH National General Certificate in Occupational Health and Safety is an ideal first step towards a career as a health and safety professional.

This course is designed to provide a sound foundation to the fundamental elements of environmental management. The course looks at environmental management systems and impact assessments, sources and use of energy and energy efficiency, control of pollution, planning for and dealing with environmental emergencies.

The full NEBOSH National Certificate in Construction Health and Safety full qualification (inc NGC1) is designed to deliver the knowledge and confidence that learners need to meet their health and safety responsibilities in the construction workplace, as well as enabling them to undertake safety inspections. This 13-day course, plus 2 exams, covers a range of hazards and systems for managing them, as well as offering an insight into construction law.

The NEBOSH Certificate in Fire Safety and Risk Management – Full qualification (inc NGC1) course covers 3 modules which are the fundamental topics of health and safety management and fire safety, as well as the current legislation and legal requirements.

The NEBOSH National General Certificate is recognised as the standard qualification in health and safety for the non-safety specialist. It is the most widely held health and safety qualification in the UK! OMS have an excellent pass rate of above 90% on this course, which is consistently higher than the national average. From a survey in 2014, of successful students, over 98% of respondents would recommend this qualification to others.

Recognised throughout the world, the NEBOSH International l Certificate in Health and Safety provides a clear insight into international standards and real world applications. From a 2012 survey of successful International General Certificate students, of those who responded over 98% would recommend the qualifications to others

The construction site is a potentially dangerous place, and proper health and safety good practice are critical. This comprehensive course is aimed at managers and others responsible for the safety of the workforce on site, and provides a valuable insight into both individual and organisational responsibilities for health and safety on site.

Commonly known as cat and genny - unit 01, this course is designed to train experienced operatives who are required to locate underground apparatus during roadworks, this course covers skills and techniques for avoiding danger, positioning apparatus, and reading office records.

This course, previously known as unit 02 is designed to ensure that candidates are able to carry out daily tasks in writing and guarding systems, to enable trainees take adequate measures to minimise inconvenience to the general public during street works. It covers a number of areas including planning and positioning, as well as understanding of safety zones and pedestrian walkbys. Please note that this course does not certify candidates to supervise setting out of signing, lighting and guarding.

In this course, previously known as unit 10, we review the supervision of setting out traffic lights, signs, cones and barriers for temporary Streetworks, in compliance with NRSWA. The course reviews the decision-making process for designing temporarily Streetworks, as well as how to manage the setup of such works and dealing with conflicts and disagreements. Please note that this course does not certify candidates to undertake the setting out of signing, lighting and guarding of temporary street works.

Now available LIVE via the OMS ‘Virtual Classroom Training System’

Assembling, dismantling, moving and using mobile access towers can be a dangerous business, with a high risk of personal injury both to those involved and those nearby. In this course, we look to train delegates to a high level of competence in the assembly, disassembly, inspection and use of these towers . The course also looks at current legislation and guidance, and contains both a written and practical assessment.

This one-day course combines the PASMA courses on scaffold and low-level towers, and offers a clear insight into the legislation, guidelines, details and potential hazards of their use. It looks at how to safely assemble, dismantle, relocate and use both low-level access units and scaffold towers, as well as looking at the potential threats they may cause.

In this half-day course, personnel who work from prefabricated units under 2.5 m in height, will gain an insight into the regulations, legislation, and product standards of such units, and how to avoid hazards. The course combines a written and practical assessment.

This course covers current Legislation, Regulations and Guidance affecting work at height with mobile access towers, PASMA Code of Practice, a look at assembling, altering and dismantling mobile access towers incorporating current best practice for fall protection, inspection of completed mobile access towers and completion of Tower Inspection Records.

This course is to train delegates to a high level of competence to assemble, dismantle, alter, move, inspect and use a mobile access tower on stairs without risk of personal injury to themselves or anyone who may be affected by their work, give an understanding of the legal issues affecting work at height with mobile access towers, the product standards, and a thorough knowledge of the hazards affecting the use of mobile access towers on stairs.

Selling is competitive, and even the most experienced salespeople can hone their skills for more effective results. This 2 day workshop identifies participants’ existing skills and builds on them, as well as incorporating up-to-date proven sales methods.

This bespoke course is designed to prepare new line managers for the challenge of appraisal and performance management, and as a refresher and skill-building course for existing managers and HR professionals.

We’ve all had situations at work where we could benefit from more confidence. With this one-day workshop course you will learn the tools and techniques you need to stay assertive and avoid passive or aggressive behaviour.

Sometimes it’s not easy to get your point across. This course is designed to help you communicate more effectively and write with accuracy, style and impact.

Managers and Team Leaders often want to progress in their career, but what does that mean in practice? This ia a 1 day course examines career development, tools and techniques for getting ahead and how to develop a personal action plan.

Effective coaching can bring out the best in your staff and enable them to achieve more and grow their skills. This course is designed to offer one-to-one training to help learners become more confident and skilled at coaching and get the best from their teams.

Better communication gets better results, and in this two-day workshop course you will gain the opportunity to consider your personal communications style and ways to adapt and improve it with useful tools and techniques.

Your customers make your business, and good customer care makes them feel valued and generates loyalty. This one-day workshop course looks at what defines quality customer care, as well as how to make an effective impression, offer solutions and deal with difficult situations.

Creativity drives innovation, and in this course you have the opportunity to reimagine your problems and discover untold possibilities. With a one-to-one approach, this course shows you how to engage your mind and turn your ideas into results.

Holding people’s attention when making presentations isn’t always easy, nor is staying calm and confident in front of an audience. This two-day workshop course will provide individuals with the tools they need to deliver clear, concise and engaging presentations that get their message across, while helping them to manage their nerves.

For managers and those in HR, a clear understanding of employment law is a vital part of their role. This one-to-one course will cover a wide range of current legislation and review how these laws apply to the workplace.

Stepping up to a management position can be an intimidating challenge, and new managers need a broad range of skills to be truly effective. This course delivers the knowledge and understanding that makes a great manager.

This two-day workshop is designed for those who are required to influence others during the course of their working day. With a highly interactive design, the course looks at your own personal persuasion style and how it affects others, before helping you to develop a strategy that will improve your communication and help you to achieve your ideal outcome.

This interactive two-day workshop is designed for anyone working within a project team, and will equip them with the general project management skills to help them anticipate and manage problems, and ensure that projects are delivered on time and to budget. The course combines study of project theory and terminology with a number of practical exercises using proven project management techniques. The course covers everything from project initiation, estimating and planning, to human factors, project execution and standard methods.

Meetings are a fact of life for most people during the working day, and this one day workshop is designed to help participants to make productive use of these meetings, and to take part in a meaningful way. During the course, attendees will gain experience of taking on different roles in each meeting, and learn effective presentation skills and techniques, as well as key skills for chairing meetings and dealing with challenging situations.

Change is the only constant, so the saying goes, and for managers, it is a fundamental challenge of their role. This interactive course teaches the principles, the tools and the skills needed to manage moments of change that can make or break an organisation.

Disciplinary matters and employee grievances demand clear understanding of the laws, regulations and issues they raise. In this two-day workshop class, you will receive clear guidance on relevant law as well as practical advice regarding what can be a sensitive issue.

Disciplinary situations happen, and they need to be handled properly, both in terms of the law and the individual. This one-day interactive workshop covers the topics you need to manage these difficult situations, as well as providing a safe and confidential forum for discussion and role-play.

Getting the best from your team and finding new talent is an ongoing challenge for managers, and in this 2-day workshop we will explore managing that talent at every stage of the employment process.

Mentoring helps your team to grow into their roles and build their skills and confidence, and a skilled mentoring process can deliver great results for your organisation. This 1-day workshop covers all you need to know to mentor and develop your employees effectively.

The art of negotiation is vital for the modern business, and in this two-day workshop you will learn how to plan, build rapport, state your position and agree compromise confidently.

The recruitment process is complex and crucial to your business, so knowledge of employment law and the recruitment process is vital. This two-day workshop course takes you through the things you need to know to deliver fair, legal and successful recruitment selection.

Stress in the workplace, when handled effectively, can be a great motivator for improved performance and achievement, but for many it is a cause of distress and a threat to their work, health and productivity. In this course, we look at the causes and nature of stress as well as how to become aware of your own stress levels and manage them. The course looks at the role of assertiveness in stress management, as well as how to deal with conflict and make yourself more resistant to stress.

Effective management demands a wide range of skills, and this 2 day course covers all the basics. It’s ideal for new managers or those with little formal management development, as well as those aspiring to management.

Now available LIVE via the OMS ‘Virtual Classroom Training System’

Now available LIVE via the OMS ‘Virtual Classroom Training System’

Now available LIVE via the OMS 'Virtual Classroom Training System'

Now delivered LIVE using the OMS ‘Virtual Classroom Training System’

Now delivered LIVE using the OMS ‘Virtual Classroom Training System’